ROWAnews, Press releases and events

Laser marking of plastics


ROMIRA, an independent compounder, has been setting standards in the production of technical compounds and blends for over 25 years.

Pinneberg/Germany, September 18th, 2018 – Utilizing technical know-how and state-of-the-art production facilities with the aim to offer customers the best possible solutions is what distinguishes the company from competitors. Thanks to ROWA Masterbatch’s state-of-the-art laser marking machine, ROMIRA is able to offer a broad range of already developed and customer-specific product solutions for laser marking.

The advantages of laser technology, compared to pad printing, for example: the laser operates quickly, contact-free and efficiently. As there is no need for retooling in case of design changes, both the production time and reject rate can be reduced.

The laser marking process is used for product labeling – for example to inscribe serial numbers and to alter the surface design in terms of coloring and structure. Apart from the preset laser parameters, the laser additive used as well as the material itself are crucial for the quality of the labeling.

With polycarbonate (PC) and styrenic copolymers (PS, ABS, ASA, AES, SAN) a dark marking is achieved by partial carbonization, i.e. charring. With polyacetals (POM) and polyacrylates (PMMA) a light marking can be produced by foaming.

Polycarbonate is easy to mark even without laser additive, but the quality of the marking – contour definition and contrast – can be greatly improved by the use of the right laser additive. When marking styrenic copolymers, on the other hand, a laser additive is essential because the marking is poor quality without special additives.

Polyacetals and polyacrylates foam, as a result of the interaction with the laser and produce very contrasting, light markings in dark colors with the corresponding additives. Glass fibers and glass beads normally have no effect on the marking contrast. Mineral fillers such as talcum, however, may have a slightly negative effect. What’s more, the flame retardants used in certain fire-resistant products can hamper laser marking because they prevent the combustion process.

In a general comparison, labeling of plastic parts by means of laser marking has proven to be an effective method with great benefits. Thanks to its many years of experience and ROWA GROUP-wide expertise ROMIRA is the perfect partner on your side and always open to new projects.

Lieber Leser!

Sie verwenden einen alten Browser. Damit Ihnen nichts entgeht und Sie alle Inhalte sehen können, aktualisieren Sie bitte Ihren Browser. Ein Auswahl finden Sie hier: